Optical diffusers based on uniform nano-sized polymer balls/nematic liquid crystals composite films

ABSTRACT

Optical diffusers are promising diffusing materials in the optical devices such as monitors, projectors, fibre optics, light-emitting diode (LED) systems and liquid crystal displays (LCDs). We report optical diffusers comprising uniformly distributed nano-sized polymer balls/nematic liquid crystals (LCs) by ultraviolet (UV) click reaction of ene monomer and thiol monomer. By optimising the mass ratio 1:1 of ene and thiol, of which the average diameter of the corresponding nano-sized polymer balls is about 900 nm, relatively high optical transmission and haze with 88.99% and 94.49% are yielded, respectively. Furthermore, by controlling the curing time, the average diameter of nano-sized polymer balls can be reduced to 810 nm, and the developed film exhibits high transmission (98.49%) without sacrificing the high haze (91.77%). This paper demonstrates that UV click reaction is an economical approach to fabricate optical diffusers in a controllable manner.     

Lignin,a biomass crosslinker,in a shape memory polycaprolactone network

This work reports a new direction of natural lignin valorization, which utilizes lignin to produce crosslinked polycaprolactone (PCL) via a straightforward synthesis. Lignin's hydroxyl groups of its multibranched phenolic structure allow lignin to serve as crosslinkers, whereas the aromatic groups serve as hard segments. The modified natural lignin containing alkene terminals is crosslinked with a thiol‐terminal PCL via Ru‐catalyzed photoredox thiol‐ene reaction. The high rate of gel contents measured for all crosslinked polymers, with the least being 84% of gel content, indicates efficient crosslinking. The prepared flat rectangular shape lignin‐crosslinked PCL sample demonstrates rapid thermal responsive shape memory behavior at 10 °C and 80 °C showing interconversion between a permanent and temporary shape. The melting temperature of the lignin‐crosslinked PCL is tunable by varying the percent weight of lignin. The 11, 21, and 30 wt % lignin demonstrated T_m of 42 °C, 35 °C, and 26 °C, respectively. The role of lignin as a crosslinker presented in this work suggests that lignin can serve as an efficient biomass‐based functional additive to polymers. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2121–2130     

Analysis of a “3-(Naphthalen-1-ylimino)indolin-2-one” Compound and Its Antimicrobial Assessment Using Lipid-Based Self-Nanoemulsifying Formulations

In recent years, indole derivatives have acquired conspicuous significance due to their wide spectrum of biological activities—antibacterial, antiviral, and anticonvulsant. This compound is derived from naturally grown plants. Therefore, synthesis of a novel “3-(Naphthalen-1-ylimino)indolin-2-one” compound (2) and its analysis using UPLC systems along with antimicrobial assessment was the aim of the current study. Isatin was used as a parent drug for synthesizing compound (2). Liquid Chromatographic analysis was performed using a C18 BEH column (1.7 μm 2.1 × 50 mm) by UPLC systems. Degradation studies were carried out to see whether acid, base, thermal, and oxidizing agents had any impact on the synthesized molecule in stress conditions (100 °C). A lipid-based self-nanoemulsifying formulation was developed and selectivity, specificity, recovery, accuracy, and precision were measured as part of the UPLC system’s validation process. Antimicrobial studies were conducted using gram-positive and gram-negative bacteria. The standard samples were run with a concentration range of 5.0–100.0 μg/mL using the isocratic mobile phase comprising of methanol/water (70/30 %v/v) at 234 nm; good linearity (R² = 0.9998) was found. The lower limits of detection (LOD) and quantitation (LOQ) of the method were found to be 0.81 μg/mL and 2.5 μg/mL, respectively. The coefficients of variation were found to be less than 2%. The antimicrobial study suggests that compound (2) has a substantial growth effect against gram-negative bacteria. It was successfully synthesized and applied to measure the concentrations in lipid-based dosage form, along with potent antimicrobial activities.     

Synthesis of Honeycomb-Structured Beryllium Oxide via Graphene Liquid Cells

Using high-resolution transmission electron microscopy and electron energy-loss spectroscopy, we show that beryllium oxide crystallizes in the planar hexagonal structure in a graphene liquid cell by a wet-chemistry approach. These liquid cells can feature van-der-Waals pressures up to 1 GPa, producing a miniaturized high-pressure container for the crystallization in solution. The thickness of as-received crystals is beyond the thermodynamic ultra-thin limit above which the wurtzite phase is energetically more favorable according to the theoretical prediction. The crystallization of the planar phase is ascribed to the near-free-standing condition afforded by the graphene surface. Our calculations show that the energy barrier of the phase transition is responsible for the observed thickness beyond the previously predicted limit. These findings open a new door for exploring aqueous-solution approaches of more metal-oxide semiconductors with exotic phase structures and properties in graphene-encapsulated confined cells.     

Drying of Salt Solutions from Porous Media: Effect of Surfactants

Transport in Porous Media - The evaporation of salt (NaCl) solutions from porous media is studied in the presence of surfactants, because surfactants are often used as cleaning agents for...     

DEM-FEM coupled numerical investigation of granular materials to increase crashworthiness of double-hull vessels

In this contribution, a novel design strategy is investigated for improving the crashworthiness of double-hull vessels, which involves usage of granular materials. For numerical simulation, a framework based on coupling of the Discrete Element and the Finite Element Method is used to study load bearing capacity of granular materials during uniaxial compression. In addition, the effect of Young's modulus of particles is also investigated with respect to the load transferability. (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Entropy and specific heat as a measure of fluctuations in multiparticle production in relativistic nuclear collisions

An analysis to disentangle information about the occurrence of dynamical fluctuations in multiparticle production in high energy nucleus-nucleus collisions has been carried out in terms of fractal moments and entropy for the experimental and simulated data using FRITIOF, UrQMD and HIJING generators. Although there is a possibility to thermodynamically interpret the final state of multiparticle production by calculating the values of specific heat, c, using G _q - and F _q -moments. However, both these moments give markedly different values of c. The constancy observed in the values of specific heats calculated from either G _q - or F _q -moments is in accord with the predictions of constant specific heat approximation. Variations of multifractal and factorial moments and various other parameters calculated from these moments predict the presence of non-statistical fluctuations in high energy nuclear collisions.